One Control Crocodile Tail Loop Wing OC10W

€699.00 incl. VAT

Online available Usually shipped the next day!

Walldorf: Currently not at the location

Frankfurt: Currently not at the location

33 days return policy Free returns (DE) without giving reasons

Product number: 10024709

Large selection
From pick to amp, from stick to kit: we are your one-stop shop for everything you need!

★★★★★

"Great, always happy to order again."

from Harald B. from the 06/02/2022

Product information

The Crocodile Tail Loop Wing (OC10W) is the result of user feedback, technical advances and practical experience gained by One Control over a decade of designing and manufacturing some of the music industry's finest loop switches. Additionally, this is One Control's first loop switcher that can be programmed and controlled via bluetooth using the Winglink iOS app! The OC10W features the BJF buffer circuit (designed by Björn Juhl) to adjust impedance on long cable runs or large setups, thereby preventing signal loss. Without the buffer, the OC10W works completely true bypass. With seven Mono loops in serial order, effects pedals can be switched on and off without affecting the tone or dynamics of the signal. Three additional parallel loops give the user up to ten programmable, switchable effect loops. A tuner out with mute switches and full midi control is also available, and amplifier can also be controlled via the three FS connections (TRS) and an 8-pin DIN plug . 168 midi presets can be freely programmed and can be accessed via the footswitch or via midi program change commands. The OC10W can be easily switched to manual mode and used to easily turn the loops on and off via the footswitch . Thanks to the simple bluetooth connection with the Winglink iOS app, the user can remotely control and program the OC10W, meaning loops and complex setups can be easily saved in one of the 168 presets via an iPhone or iPad. The One Control OC10W Crocodile Tail Loop Wing offers all the possibilities to take modern pedalboards to the next level !

Programmable 10-channel true bypass loop switcher for effects pedals
footswitch provide control over 10 independent loops and a separate tuner output
extremely simple and intuitive programming
Winglink iOS app for programming and remote control
168 freely configurable presets (24 banks, 7 presets per bank)
2 selectable switching modes (Program Mode, Direct Mode)
Integrated BJF buffer circuit with separate inputs and outputs
7 serial loops and 3 separate loops
3 separate footswitch connections and an 8-pin DIN plug can be used as an amp footswitch
fully midi capable with midi Out and midi In
true bypass
11 footswitch (PGM1/L1, PGM2/L2, PGM3/L3, PGM4/L4, PGM5/L5, PGM6/L6, PGM7/L7, Bank Up/L8, Bank Dn/L9, Mute/L10, Direct)
10 pushbutton switches for programming the presets
5 switches control the footswitch connections
4 multi- function pushbutton switches
bluetooth on/off switches
Status LEDs
Metal enclosure
6.3 mm Mono jack inputs/ outputs
5-pin midi input/output
power supply via optional 9V DC mains adapter, 2.1 x 5.5 mm barrel connector, polarity (-) inside
battery powered not supported
current consumption max. 400 mA
dimensions (L x W x H) 100 x 440 x 64 mm
weight 1.34kg

Amount of loops: 10
Amount of presets: 70 freely configurable presets
Amount of switches: 10
Buffer: BJF buffer
Color / finish: Black
Connections: 32x 6.3 mm jack (BJF buffer in, BJF buffer out, tuner, Input, Out 1-2, Sen/Return 1-7, IN/S(NC)/R/OUT(NO) Ch 8-10, RJ45 (Sync/Link)
Design: Pedal
Dimensions: 110x462x64mm
Including: Looper
Midi: Midi in/out
Power supply: External mains adapter
Special features: Link function offers the possibility of connecting two OC10s in two selectable modes (sync, download).
Subcategory: Looper
Switch: Tuner/L10, PGM 1/L1-PGM7/L7, Bank Down/L9, Bank Up/L6
Switches: Link Config, midi on/off
Weight: 1800g